the supervised receiver. The alarm signal will be repeated
every 10 seconds thereafter as long as smoke is still pre-
sent. A restore report will be sent when the smoke detection chamber clears.
Supervisory status reports are sent from the GEM-SMK every hour.
Coding switches are not required or used in the GEM-
SMK. Each transmitter is assigned a unique identification
code number at the factory.
The smoke detector and transmitter are powered by two
9-volt alkaline batteries (supplied) which can power the
unit for up to two years. If the battery voltage drops be-
low normal, a low-battery report will be sent to the receiver with any status or alarm transmission.
If a low- battery condition is indicated, replace both batteries.
NOTE: Temperature and humidity extremes may reduce
the life of the battery.