Security Napco IQ Profiler PIR Sensor

50 lb. pet immunity (22.7kg) & superior false alarm discrimination with unique dual focal lenses.

-Installation in a snap with patented Quick-Mount and Quick-Wire terminals

-Maximum range: 50 x 50 feet -New & improved Quick-Catch mode

-Advanced microprocessor-based circuitry with proprietary NAPCO detection algorithms for optimal protection from false alarms without compromising catch

-Bi-optic contour case and dual focal lenses provide exceptional distance profiling:

-Far field lens allows for detection of large objects and ignores small targets nearby

-Near field lens allows for discrimination of small targets nearby pet and rodent immunity

-Shielded high-performance aspheric lenses -Look down/creep zones provide coverage beneath sensor

-Sensor chamber prevents insect, draft, and dust interference.

-Utilizes analog to digital signal conversion -Vertical aiming capabilities

-Flat or corner mountable to 8.5’ (2.6m) -Wall mount and corner mount

-Swivel aiming with optional SVL2 swivel bracket

-Advanced microprocessor-based circuitry with built-in profiles of common false alarm sources: -20v/m RF-shielded circuitry

-Operating Temperature: 14°F to 122°F (-10° to +50°C)

-Mounting: Wall or corner, 6.5’ to 8.5’ max. (2 x 2.6m, max.)

-Alarm Output: Normally-Closed Form-A Relay (Form C Option)

-Contact Ratings: 100mA, 24VDC with internal 10 Ohm current-limiting resistor

-Power-Supply Requirements: Intended for operation from a power source that provides a 4-hour battery backup in event of power failure -Filtered DC: 10.6 to 16VDC nominal with battery backup from control panel

-Current Drain: 28mA (idle or alarm) at 12VDC (nominal); 33mA (idle or alarm) at 16VDC (nominal)

- -Dimensions: 4.5” x 2.5” x 1.8” (11.4 x 6.4 x 4.6cm) (H x W x D)

-Shipping Weight: 6 oz. (170.1g)